Transmission Service

BG Quick Clean for Automatic Transmissions
BG Quick Clean for Automatic Transmissions is a safe and effective solvent/dispersant cleaner that will quickly remove accumulated deposits from the valve body, filter screen and other automatic transmission components. This product is designed for use in the BG Power Flush and Fluid Exchange System, Part No. PF5.
Part No. 106 11oz.(325 mL) can

BG ATC Plus enhances properties of both new and used automatic transmission fluid. It improves fluid oxidation stability, thereby prolonging fluid life and the life of the transmission. It prevents leaks by conditioning hardened seals- keeping them soft and pliable. BG ATC Plus helps control transmission shudder, retards formation of sludge and varnish deposits and prevents foaming.
Part No. 310 11oz. (325 mL) can
Part No. 306 6oz. (177 mL) bottle


Power Flush and Fluid Exchange System
The BG PF5 Power Flush and Fluid Exchange System dissolves and removes harmful deposits from critical transmission components and exchanges the old, oxidized ATF for new fluid of the exact specifications required by the car manufacturer in about 5-7 minutes. No other equipment is simpler to operate. Once the connection is made between BG PF5 and the vehicle, the operator turns on the process.

The BG PF5 is fully automatic and requires no further monitoring. There are no adjustments required, no tanks to monitor and the transmission remains full througout the process. When the exchange is complete the unit simply goes on bypass and sends the incoming new fluid through its normal route back to the transmission. The old fluid is safely captured inside the unit where it will remain until it’s time to refill for the next service.

The BG PF5 has no power supply of any kind and no scheduled maintenance is required. It comes complete with all the adaptors needed to hook up to almost any type of vehicle. It can be recharged just before the next service, allowing the unit to be loaded with the exact spec fluid required for each service. Recharing takes only a couple of minutes and can be done from a pressurized ATF source or it can be filled manually quite easily. With a footprint of only 29″ x 14″, it’s the perfect system for a crowded shop.
Part No. PF5
Part No. PF5MO Metered Output model
Part No. PF5MO High Output model for low-flow transmission

Comments are closed.